How to Clean Shower

What You'll Need

• Soap-Man Power Bleach
• Soap-Man Vibes Multi-Surface Cleaner
• White vinegar
• Baking soda
• Scrub brush
• Spray bottle

Step-by-Step Instructions

1. 1

   Spray down the entire shower

   Spray Power Bleach on the walls, floor, and fixtures. Let it sit for 10 minutes to dissolve soap scum and kill mold and mildew.

2. 2

   Scrub the walls and floor

   Scrub tile walls and the shower floor with a brush, working from top to bottom so dirty water flows down.

3. 3

   Clean the glass door

   Spray glass doors with a vinegar and water solution. Scrub with a non-abrasive sponge and squeegee dry for a streak-free finish.

4. 4

   Address grout and caulk

   Apply a paste of baking soda and bleach to grout lines and caulk. Let sit 15 minutes, scrub, and rinse.

5. 5

   Rinse everything down

   Rinse all surfaces thoroughly with hot water, starting from the top. Turn on the fan and open the door to ventilate.

Pro Tips

• TIPSqueegee the shower walls after every use. This one habit reduces soap scum, water spots, and mold by 90%.
• TIPSpray the shower with a daily shower spray after each use to prevent buildup between deep cleans.
• TIPLeave the bathroom door and fan on for 30 minutes after showering to reduce humidity that feeds mold.

Common Mistakes to Avoid

• XMixing bleach and vinegar, which creates toxic chlorine gas. Use them on separate cleaning passes.
• XNeglecting the shower floor drain, which accumulates hair and soap and causes slow drainage and odors.
• XUsing abrasive cleaners on glass shower doors, which scratch them permanently.

Frequently Asked Questions