Bedroom

How to Clean Electric Blanket

We spend a third of our lives in bed. A clean electric blanket means better sleep and fewer allergens. Here's how to clean yours.

What You'll Need

  • Soap-Man Power Wash Laundry Detergent
  • Cold water
  • Mild stain remover

Step-by-Step Instructions

  1. 1

    Disconnect all electrical components

    Unplug and completely detach the power cord, controller, and any connectors. Never wash with these attached.

  2. 2

    Pre-treat stains

    Spot-treat any visible stains with a small amount of Power Wash detergent.

  3. 3

    Machine wash on gentle cold

    Wash on the gentlest cycle with cold water and a small amount of detergent. Keep the cycle short -- extended agitation can damage internal wires.

  4. 4

    Dry on low or air dry

    Tumble dry on the lowest heat setting for 10-15 minutes to remove excess moisture, then drape over a drying rack to finish air drying.

Pro Tips

  • TIPMost modern electric blankets are designed to be machine washable. Check your specific model's instructions.
  • TIPThe brief tumble dry followed by air drying is the safest approach for the internal wiring.
  • TIPInspect the blanket for damage to wires or connections before each season of use.

Common Mistakes to Avoid

  • XWashing with the controller or power cord still attached, which damages electronics and is a safety hazard.
  • XUsing a long or aggressive wash cycle, which bends and breaks the heating wires inside.
  • XDry cleaning an electric blanket, as the solvents can damage wire insulation.

Frequently Asked Questions

Most modern ones, yes. Use gentle cold cycle, short duration. Always disconnect all electrical components first.