How to Clean Pavers

What You'll Need

• Soap-Man Turbo Clean Degreaser
• Stiff broom
• Garden hose or pressure washer
• Polymeric sand
• White vinegar (for moss)

Step-by-Step Instructions

1. 1

   Sweep and clear debris

   Remove furniture and sweep all loose dirt, leaves, and debris from the paver surface.

2. 2

   Pre-wet the pavers

   Wet the entire paver area with a garden hose. This prevents cleaning solution from being absorbed too deeply.

3. 3

   Apply cleaner and scrub

   Apply Turbo Clean Degreaser to stained areas. Scrub the entire surface with a stiff broom or brush.

4. 4

   Rinse and re-sand joints

   Pressure wash or hose off the cleaner. Sweep polymeric sand into the joints to replace any that washed out.

Pro Tips

• TIPAlways re-sand paver joints after pressure washing. The joint sand is what locks pavers in place.
• TIPFor moss and algae, spray white vinegar, wait 30 minutes, then scrub. The acidity kills growth at the root.
• TIPSeal pavers after cleaning to enhance color and protect against stains, weeds, and ant hills.

Common Mistakes to Avoid

• XUsing too much pressure, which dislodges joint sand and can crack or chip paver edges.
• XNeglecting to refill joint sand after cleaning, which allows pavers to shift and weeds to grow.
• XUsing bleach near landscaping without protecting plants with tarps and pre-watering.

Frequently Asked Questions